Sarjan Standard Portable Deminerliser are up flow two-bed type. Compact and simple to operate with conductivity meter to monistor quality of treated water continuously when in operation.
»
Important :
1)
Quality of treated water depends on Raw Water quality.
2)
Raw water should be clean, cold, colorless and free from organic matters and oil.
3)
The treated water is not Pyrogen free but it confirms to IS 1069/64.
4)
Capacity per Regeneration depends on ionic load present in raw water.
»
Technical Specification :
Model
DM-100
DM-200
DM-600
DM-1000
Flow Rate Lts/Hr.
Max
100
200
600
1000
Min
10
20
60
100
Quantity of Resins in Lts.
Cation
10
20
30
50
Anion
10
20
30
50
Working Pressure Kg./Cm2
Max
2.0
2.0
2.0
2.5
Min
0.5
0.5
0.5
1.0
Chemical Required/Regeneration
HCL (30% Commercial) Lts
2.5
6.0
10.0
16.0
NaOH (98%) Commercial kgs
0.5
1.2
2.2
4.0
Quality of treated water
Electrical conductivity micromoh/cm
10
10
10
10
Total Dissolved solids in PPM
5
5
5
5
pH
7.5-8.5
7.5-8.5
7.5-8.5
7.5-8.5
Output/Regeneration in Lts. (Based on Ionic Load of 200 PPM)
1700
3400
5200
9500
Sarjan Standard Up flow Deminerlisers are up flow two-bed type. Compact and simple to operate with conductivity meter to monitor quality of treated water continuously when in operation.
»
Important :
1)
Quality of treated water depends on Raw Water quality.
2)
Raw water should be clean, cold, colorless and free from organic matters and oil.
3)
The treated water is not Pyrogen free but it confirms to IS 1069/64.
4)
Capacity per Regeneration depends on ionic load present in raw water.
»
Advantages :
•
Easy to install and operate with low cost maintenance.
•
High capacity bead type Cation and Anion Resins are used which is remarkably stable and has a long life
•
Consistent treated water quality with lower cost of regenerates.
•
Longer operating cycles.
•
SARJAN Standard Deminerlisers are based on ion Exchange process up flow type manually operated, ready to install, in order to get highest efficiency. Our Deminerlisers are designed on new proven technical counter current regeneration system. This means that water flow through the unit is counter current to the regeneration chemical solution.
•
SARJAN Deminerlisers are useful for Pharmaceuticals, Chemical, Electroplating, Induction furnace and Industries which needed law TDS water for their requirement.
»
Technical Specification :
Model
DM-1000
DM-2000
DM-3000
DM-5000
Flow Rate Lts/Hr.
Max
1000
2000
3000
5000
Min
100
200
300
500
Quantity of Resins in Lts.
Cation
50
100
140
240
Anion
60
110
160
260
Working Pressure Kg./Cm2
Max
3.5
3.5
3.5
3.5
Min
1.5
1.5
1.5
1.5
Chemical Required/Regeneration
HCL (30% Commercial) Lts
15
30
42
72
NaOH (98%) Commercial kgs
4.2
7.7
11.2
18.2
Quality of treated water
Electrical conductivity micromoh/cm
10
10
10
10
Total Dissolved solids in PPM
5
5
5
5
pH
7.5-8.5
7.5-8.5
7.5-8.5
7.5-8.5
Output/Regeneration in Lts. (Based on Ionic Load of 200 PPM)
